The EMBOTRAP™ III Revascularization Device (5mm x 37mm) is a mechanical thrombectomy stent retriever engineered for effective clot engagement and vessel revascularization in acute ischemic stroke procedures.

The device consists of a three-dimensional nitinol stent-like distal assembly mounted on a tapered nitinol shaft. It is supplied pre-loaded within a dedicated Insertion Tool to facilitate controlled deployment and procedural efficiency.

• Design Features
• Three-dimensional nitinol stent architecture
• Optimised clot integration and retrieval performance
• Pre-loaded delivery system for streamlined preparation
• Radiopaque visibility for precise placement
• Compatibility
• Microcatheter
• Compatible with microcatheters featuring an internal diameter (ID) of 0.021” – 0.027”
• Guide Systems
• Designed for use with a compatible Neurovascular Guide Catheter or Sheath
• Guide/sheath selection must match the chosen microcatheter system
• Additional Accessories
• Compatible accessories may include:
• Intermediate Catheter / Aspiration Catheter
• Rotating Hemostasis Valve (RHV)
• Note: The RHV must allow the EMBOTRAP III Insertion Tool to seat fully within the microcatheter hub and secure firmly during the procedure.
• Important Information
• For full indications, contraindications, warnings and precautions, consult the official Instructions For Use (IFU).
• Reference:

Cerenovus Instructions For Use: CERENOVUS EMBOTRAP™ III. CS162-02 Rev. B. December 2020.